New Console

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Drill a hole in the bottom of the cup holders and attach a nipple to the hole and a hose going down past the electronics. There are cupholders that you can buy with a nipple on the bottom already but I don't know how fitment would go with the console as I don't have a PS console... Yet... Here is an example from a "Big Box" store.

Edited by darrklim2 - 05/16/2017 at 2:15pm

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
darrklim2 Members Profile Send Private Message Find Members Posts Add to Buddy List Most Dedicated Members Excellent Member Of The Month Club 7/08 Joined: 04/15/2008 Location: Alexandria MN Status: Offline Points: 718	Post Options Post Reply Quote darrklim2 Report Post Thanks(1) Quote Reply Topic: New Console Posted: 05/16/2017 at 2:14pm
	Drill a hole in the bottom of the cup holders and attach a nipple to the hole and a hose going down past the electronics. There are cupholders that you can buy with a nipple on the bottom already but I don't know how fitment would go with the console as I don't have a PS console... Yet... Here is an example from a "Big Box" store. Edited by darrklim2 - 05/16/2017 at 2:15pm
	Darren Deer Creek, Minnesota, USA 78 Lund Mr. Pike 87 Sun Patio Sunliner DLX 04 Chevrolet Silverado

Barnmb7117 Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 09/11/2012 Location: Chicago,IL Status: Offline Points: 504	Post Options Post Reply Quote Barnmb7117 Report Post Thanks(0) Quote Reply Posted: 05/16/2017 at 1:23pm
	I Never had that problem and I have the same console.
	Mike 1993 Tracker fishing barge 21 2015 Evinrude pontoon series 90 hp Summer - On the wolf River Weyauwega, WI Winter- Chicago, IL

SandKat Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 05/15/2017 Location: Louisiana Status: Offline Points: 1	Post Options Post Reply Quote SandKat Report Post Thanks(0) Quote Reply Posted: 05/16/2017 at 12:27am
	After twice replacing a console made from treated wood, we decided to try to the Pontoon Stuff Classic Pontoon Boat Console. The installation went well and the console looks nice. I am wondering how to avoid standing water from rain and spray in the cup holders and other indentations on top of the console. Our prior cup holders were placed where water could drain through without damage to wiring and cables below. I am not sure that drilling holes in the top of this console, at bottom of the cup holders, is a good idea. Can anyone who installed a similar plastic console tell me how you avoid standing water in the cup holders?